5-axis portal CNC machining centre
Extreme machining angles
Simultaneous 5-axis capability
The HV (horizontal/vertical) variant of the Uniport 6000 is a truly cost-effective choice for 5-axis CNC machining of large components. In addition to its generous daylight opening, the Uniport 6000-HV features a tilting nutator head. This can travel through an angle of 100°, going from a vertical plane to 10° over the horizontal, making it possible to adopt even the most extreme machining angles. Coupled with outstanding price/performance, this compact portal machine is a must if you’re looking for true flexbility.
- Affordable performance
- Any angle
- Full view
The Uniport 6000-HV with its 2-axis nutator head has a host of productivity features that make it a truly flexible CNC machining centre. What sets it apart is the large horizontal and vertical opening, which makes it possible to machine extremely big parts on a compact portal machine. And that translates into an amazing price/performance ratio from an affordable solution.
Able to machine any angle or plane without restriction, this CNC machine with its 2-axis head and cross slide construction is a well thought-out concept that has been developed using proven technology. The drive for the continuously variable B-axis and C-axis is cooled to enhance thermal performance, maintaining accurate positioning. The high speed motor spindle and rapid traverse (40.000 mm/min) give it outstanding dynamic properties.
The Uniport 6000-HV incorporates a travelling platform with an operator cabin fixed to the right hand column. This makes it easy for operators to ride along safely and keep the machining process in full view. When the time comes to change workpieces, the low step makes getting on to the table extremely easy. The work area is flexible too, with the option to use the entire space for one large piece, or to adopt pendulum machining with the two stations separated by a screen.
This CNC machine, Uniport 6000-HV, has a chip conveyor on both sides and a HSK-A100 or ISO50 (optional) tooling system, with automatic tool change in the spindle. Other enhancements include a camera system in the work area, with the display mounted on the control panel, and a filter to remove dust, gases and vapour from the work area.
- Work Area
X-axis4.000 - 24.000+ mm
Y-axis2.500 - 6.000 mm
Z-axis1.500 / 1.800 mm
Vertical clearance1.700 / 2.000 mm
Distance spindle nose to table vertical position200 - 2.000 mm
Distance spindle nose to table horizontal position190 - 1.950 mm
Width between columns1.500 - 4.000 mm
Nutator head with motor spindle73/82 kW
Number of pockets# 37-170
Tool change time12 sec
Rapid traverse40.000 mm/min
Feed Rate5-40.000 mm/min
Speed B- and C-axis15.000 min-1
Tool measuring and tool break via lasero
Siemens / Heidenhaino
CNC machine applications
- General machining
- Oil & gas
Requiring one of the highest chip removal rates in the market, the aerospace industry needs high dynamic machines. The Unipent4000 and Unipro5000 for example are ideal for volume production in this demanding environment and can remove 10 litres per minute of aluminium while maintaining the highest accuracy. For extra large parts or engine components, the Uniport6000-HV, Uniport7000, Unicom6000 and Unicom7000 machines offer the best solutions.
applications for aerospace
At Unisign we understand that our customers don’t just buy a CNC machine, they buy a process. And price per part is key. So for general applications we offer high torque machines with high material removal rates, including 5-axis and 5-sided machining and a choice of moving table or palletized, depending on the footprint available.
applications for general machining
Pumps and valves for the oil & gas industry can be highly complex parts to produce with seals, gaskets, flanges and requirements like spiral grooves and elliptical conical eccentric turning. The machining centres from Unisign, with their high degree of automation and specially designed software, are a unique solution capable of milling parts that others cannot.
applications for oil & gas -+
Heavy duty turning, milling and drilling characterises the production of components for energy-producing equipment like (wind) turbines. So you need a CNC machine that can take the load. A mill-turn machining centre like the Unicom6000, Unicom7000 and the Uniport7000-MTC or a multi-functional Uniport6000 and Uniport7000 are the ideal solution for producing these demanding parts.
applications for energyFind out more
With over a million truck front axles being produced every year on Unisign machines it’s fair to say that we know what we are talking about in applications like these for the truck makers industry. We have established a world leading position by introducing the Unitwin6000, a CNC machine with two very powerful main spindles. The improvement in quality and reduction in cycle time is astonishing!
applications for truck
For everything from bogies to wheels and weld preparation to wheel carrier machining, Unisign has highly versatile machines like the Univers6000, Uniport6000 and Uniport7000. These moving column and gantry style machining centres are part of the machine tool program that have been designed to deliver extremely high capacity, dynamics, rapid acceleration and offer a generous working area.
applications for trainFind out more
Related CNC machine types
Notice: Undefined variable: machine in /var/www/vhosts/vps-251558-4346.hosted.at.hostnet.nl/htdocs1/wp-content/themes/unisign/components/section-machines.php on line 24
Notice: Trying to get property 'ID' of non-object in /var/www/vhosts/vps-251558-4346.hosted.at.hostnet.nl/htdocs1/wp-content/themes/unisign/components/section-machines.php on line 24